VESPA GTV 250 i.e. Скачать руководство пользователя

Страница: 22 / 80

Checks

Before using the vehicle, check:

. There is enough fuel in the fuel tank.

. The correct fluid level for front and rear brakes.

. That tyres are properly inflated.

. The correct functioning of tail lights, headlamp, turn indicators, stop light and license

plate light.

. The correct functioning of front and rear brakes.

. The oil level in the gearcase.

. The engine oil level.

. The coolant level.

02_01

Refuelling (02_01, 02_02)

Fuel: lift the saddle and unscrew the cap «

». Recommended fuel: Unleaded petrol

(95 octane min.). The fuel reserve level is signalled when the warning light

«N»

turns

on.

WARNING

SWITCH OFF THE ENGINE BEFORE REFUELLING WITH PETROL.

PETROL IS HIGHLY INFLAMMABLE.

DO NOT SMOKE AND KEEP OPEN FLAMES AT A DISTANCE:FIRE HAZARD.

DO NOT INHALE FUEL FUMES.

DO NOT ALLOW PETROL TO COME INTO CONTACT WITH HOT ENGINE OR
ANY PLASTIC PARTS.

2 Use

Содержание GTV 250 i.e.

















































































Результаты поиска

Содержание GTV 250 i.e.

Отзывы:

Похожие инструкции для GTV 250 i.e.

Бренды по названию

Популярные бренды

VESPA GTV 250 i.e., Руководство пользователя

Результаты поиска

Содержание GTV 250 i.e.

Отзывы:

Похожие инструкции для GTV 250 i.e.

Бренды по названию

Популярные бренды