VESPA GTV 250 i.e., Руководство пользователя

Страница: 15 / 80

Final step - red key
After pulling out the last blue key, insert the red key again and turn it to " ON " (this
operation should be performed within 10 seconds of pulling out the previous key).
Leave it in this position for 1 to 3 seconds and return it to the «
OFF » position.
Proper programming check
Insert the red key disabling the transponder (i.e., tilt the key cap by 90°) and turn the
key to "
ON ". Perform the engine start-up operation. Ensure that the engine does not
start. Insert the blue key and repeat the start-up operation. Check that engine starts.
WARNING
SHOULD THE ENGINE START WITH THE RED KEY (WITH TRANSPONDER OFF),
OR IN THE EVENT OF WRONG OPERATION DURING PROGRAMMING, REPEAT
THE PROCEDURE FROM THE BEGINNING.
01_15
Accessing the fuel tank (01_15, 01_16, 01_17)
With the key set to « OFF » or « ON », or with engine on, it is possible to electrically open
the saddle by pressing the button « C ». If the saddle opening system does not work,
operate the emergency lever « A ». Then, unscrew cap « B » and the fuel tank can be
reached.
15
1 Vehicle