This is the property of Overview Limited, no copying without permission
except as permitted by copyright law
23 May 2013
26
Video Settings
1.
Selecting VIDEO from the SETUP menu takes the operator to the VIDEO SETTINGS menu (See Fig 34).
2.
From the VIDEO SETTINGS menu the operator can change the following options (See Fig 35):
a.
PICTURE MODE: toggles between COL/MON, COLOUR and MONO. This sets up which display
mode is used by the camera.
b.
POSITION FOCUS: toggles between AUTO and MANUAL. This controls the operator’s ability
to adjust the focus of the camera using the control panel when setting preset positioning.
c.
FOCUS HOLD: toggles between ON and OFF. Disables auto focus to maintain a specific point
of focus.
d.
SHUTTER SPEED: toggles between AUTO, NORMAL, 1/10000, 1/3500, 1/1000 or 1/215 of a
second.
e.
DIGITAL ZOOM: toggles between ON and OFF.
f.
FREEZE FRAME: toggles between ON and OFF. When the freeze frame is on the camera will
only change its display each time it arrives at a new position.
g.
VIDEO GAIN and VIDEO LIFT: both have 8 settings between 1 and 8. This allows for the
picture to be set up depending on variation in cable lengths and the environment that the
Dome is in.
h.
CAMERA SETUP: takes you to a camera setup menu to adjust key parameters of the camera.
Fig 34
Setup menu screen
Fig 35
Video Settings menu screen
