This is the property of Overview Limited, no copying without permission
except as permitted by copyright law
23 May 2013
24
Motion Menu – Setting Up a Tour
1.
Selecting MOTION from SETUP menu allows an operator to set up tours (See Fig 26).
2.
Selecting a slow (1-8) or fast (9-16) tour from the MOTION menu takes the operator to the SETUP
TOUR menu (See Fig 27).
3.
A slow tour has a dwell time of 6 seconds and travel time between positions of 10 seconds. A fast
tour has a dwell time of 6 seconds and a travel time between positions of 1 second.
Fig 26
Setup menu screen
Fig 27
Motion menu screen
1.
SETUP TOUR menu displays the selected tour and its status.
2.
EDIT TOUR takes the operator to the EDIT TOUR menu (See Fig 28).
3.
START TOUR will exit the menu structure and execute the currently selected tour.
4.
DELETE TOUR deletes the currently selected tour.
Note:
START TOUR and DELETE TOUR will only function if the selected tour has been set.
5.
In the EDIT TOUR menu, the tour can be set up by selecting the positions wanted for that tour. Each
tour can contain up to 8 positions (See Fig 29).
6.
Selecting the FORWARD arrow confirms the new tour setup, the BACKWARD arrow deletes the last
position from the tour, and the BACK arrow cancels the setup and returns to its previous state.
Fig 28
Setup Tour menu screen
Fig 29
Edit Tour menu screen
