Vertiv™ NetSure™ ITS 12V DC Power Shelf Installation & User Manual
13
Connections to List 03 / List 13 Module Mounting Assembly
Spec. No. 588706100 List 03 / List 13 Module Mounting Assembly is configured for one (1) 230 VAC / 400 VAC or 240 VAC / 415
VAC, 4-wire + PE, 50 Hz / 60 Hz, 3-phase AC input feed per module mounting assembly. Feeds 230 VAC (Line to Neutral) or 240
VAC (Line to Neutral) input voltage to each module plus the convenience AC outlets. Each “Line to Neutral” (L1-N, L2-N, L3-N) feeds
three (3) modules.
If a cable was not ordered with the shelf, customer to install conduit or cord grips using the AC input access hole in the rear of the
shelf, and wire to the AC input terminal block located behind the rear access cover. See
. See System Application Guide
(SAG588706100) for recommended wire size and branch circuit protection device rating.
Figure 5-7:
AC Input Connections to a 588706100 List 03 / List 13 Module Mounting Assembly (Hardwired)
AC Input Connections, 588706100 List 03 / List 13, Hardwired
Nominal 230 VAC / 400 VAC or 240 VAC / 415 VAC, 4-Wire + PE, 50 Hz / 60 Hz, 3-Phase, 1 Feed per Module Mounting Assembly
(1 Feed per 9 Module Positions)
AC Feed
(Positions #1 - #9)
230 VAC / 400 VAC or 240 VAC / 415 VAC,
4-Wire + PE, 50 Hz / 60 Hz, Three Phase
L1 - N: Position #1, #4, #7
L2 - N: Position #2, #5, #8
L3 - N: Position #3, #6, #9
L3 - N: Convenience Outlet #1
L1 - N: Convenience Outlet #2
L2
L1
L3 N
Rear (back panel removed for clarity only)
Rectifier Module
Mounting Positions
#1 #2 #3 #4 #5 #6 #7 #8 #9
GND
FRAME GROUND CONNECTION
One M6 stud and hardware.
Torque: 5.7 Nm (50 in-lbs.)
AC INPUT
Wire Size Capacity: 16 to 2 AWG.
Torque: 2.5 to 4.5 Nm (22.1 to 39.8 in-lbs.)
Convenience
Outlet #1
Convenience
Outlet #2
Front (Main Module Mounting Assembly Shown, Expansion Module Mounting Assembly Similar)
Rear (Main Module Mounting Assembly Shown, Expansion Module Mounting Assembly Similar)
