Mechanical Installation
13
ITEMS
DESCRIPTION
1
Do not carry the unit directly from the side panel or pipeline of the Vertiv
™
Liebert® XDO
Figure 2-9 Unit Handling Position Requirements
2.8.3. Ceiling Mounted
The Liebert XDO uses the threaded suspension rods provided on site to hang on the elevated structure (such as the ceiling)
of the room. Specifically: fix the suspension rods on the external bracket, and then install them on the front and rear panels of
the Liebert XDO unit terminal.
Following are the steps to fix the unit with the external mounting brackets:
1. Figure 2-10
shows the four M10 I-shaped metal insert hex nuts and eight M10 non-I-shaped metal insert hex lock nuts
that come with the unit accessories to fix the four M10 threaded rods respectively on the mounting bracket.
ITEMS
DESCRIPTION
ITEMS DESCRIPTION
1
M10 threaded rod
4
Brush (accessories)
2
I type of metal hexagon nut (accessories)
5
Shim (accessories)
3
Sleeve (accessories)
6
I Type of nonmetal hexagon nut (accessories)
Figure 2-10 Unit External Installation Kit
2. Place the bracket against the front or rear panel of the Liebert XDO and ensure that the bottom edge of the bracket is
aligned with the bottom of the panel. Then use the 6 cross-recessed M6 hexagonal combination bolts in the accessories
kit to fix the bracket on the Liebert XDO panel, refer
.
