Vertiv Liebert ITA2-08KRT208, Руководство пользователя, Страница: 54 / 74

Vertiv | Liebert
®
ITA2
™
User Manual | 48
Figure 51 Initial startup guidance, Pg. 5
4.2 Transfer Between Operation Modes
4.2.1 Transfer from Inverter Mode to Bypass Mode
To transfer to the internal bypass or turn Off the UPS when the UPS is operating in Normal Mode
(the inverter is supplying clean and protected power to the connected equipment):
1. Press and hold the Power button for 2 seconds. If the bypass power is within normal operating range the
screen shown at the top left in
Figure 52 will appear, permitting transfer To The Bypass or Turn Off UPS .
2. Use the Up/Down arrow keys to change or make a selection.
3. Press the Enter key to confirm the action.
4. Press the Enter key again.
If the bypass power is outside normal operating range, the screen shown in
Figure 53
will appear
where the only selection is to Turn Off UPS and confirm the action and press the Enter key.
Figure 52 Bypass normal interface