Vertiv Liebert DSE Packaged 400, Инструкция по установке и эксплуатации

Страница: 20 / 105

3.5.1 Cooling
Table 3.2 below, provides the recommended maximum and minimum return-air temperature and dew-point conditions for
the DSE Packaged Solution Applications.
Control Settings
DP400F
DP400R
DP400B
DP500F
DP500B
DP500R
Maximum Return Air Temperature 105°F (40°C) 105°F (40°C) 105°F (40°C)
Minimum return-air temperature 85°F (29°C) 95°F (35°C) * 95°F (35°C) *
Maximum dew point 59°F (15°C) 52°F (11°C) 52°F (11°C)
Maximum Supply-Air Setpoint 80°F (27°C) 80°F (27°C) * 80°F (27°C) *
Minimum Supply Air Control Setpoint 68°F (20°C) 70°F (21°C) 75°F (24°C)
*Note: DP500 minimum air-side temperature differential at full load is 25°F (14°C)
Table 3.2 Application Envelope for DP400/500
Operating outside this envelope can decrease equipment reliability.
NOTE: When running above 77°F (25°C) supply-air temperature, the superheat readings on the refrigeration circuits
may be higher than 13°F (7.2°C). The EEVs will run out of stroke and limit mass flow, which will result in higher than
normal superheat.
3.6 Unit Weights
Model Weight, lb (kg)
Perimeter 23,500 (10,659)
Rooftop 25,500 (11,567)
Rooftop Draw Through 25,500 (11,567)
Table 3.3 DSE400 Unit Weights
Model Weight, lb (kg)
Perimeter 224,000 (10,886)
Rooftop 26,000 (11,793)
Rooftop Draw Through 26,000 (11,793)
Table 3.4 DSE500 Unit Weights
Vertiv | DSE Packaged Solution Installer/User Guide
16