Vertiv | VE Series Rack | User Manual
Installation Instructions
Mounting Side Panel
The mounting steps for the side panel are as follows:
1.
Embed the side panel in the correct direction (latch up) between the front and rear EIA rails, and place the
lower end on the crossbeam below the rack, as shown in
Figure 3-6
.
1
2
Side panel
Figure 3-6 Side Panel Mounting
2.
Toggle the latch in the direction of the arrow as shown in
Figure 3-7
, push the top of the side panel forward until the
latch on both sides is stuck in the square hole of the frame, then release the latch, the side panel is now installed.
3.
Use the key to twist the lock core to the closing position and complete the side panel lock.
Latch of side panel
Figure 3-7 Side Panel Mounting
4.
Similarly mount the side panel on the other side.
