9.
Set the DIP switch
No. 4
in the
OFF
position
and
No. 2
in the
ON
position.
The tilting limits have now been set.
1
DIP ON
2 3 4
This function is convenient when it is needed to change the traversing direction of the slats. This is
accomplished when pressing the
up button
on the wall control, the blind closes, or when pressing
the
down button
, the blind opens.
Modifiying the traversing direction of the slats
The wall control can be used in order to add a new remote control.
Adding a new remote control
UP & DOWN
BUTTONS
1.
Press and hold the
up
and
down buttons
on the
wall control at the same time until the blue light
on the wall control flashes.
2.
Then, using the new remote control, select the
desired channel using the
channel selector
button
, and press the
up button
of the new
remote control. Your
Vertilux
blind is now paired
with the new remote control.
UP
BUTTON
NEW REMOTE
CONTROL
1.
Using the wall control, press and hold the
stop
button
for about
5 s
until the blue light on the
wall control flashes.
STOP
BUTTON
WALL CONTROL
Optional functions
•
Modifiying the direction of the slats
•
Adding a new remote control
•
Resetting the motor to factory default
*If you made a mistake and pressed the stop button when the carriers were not in the desired
position, you can readjust their position with the direction buttons as long as you don’t release the
button that you have pressed on the motor.
IMPORTANT:
Secure the motor settings by covering the
limit setting buttons
with their cover.
7
vertilux.com
© 2019. Vertilux, Ltd. All Rights Reserved. Last revised: February 2019.
Содержание VTi 6-710-VB-00110
Страница 20: ......
