4
vertilux.com
© 2019. Vertilux, Ltd. All Rights Reserved. Last revised: February 2019.
TRAVERSING MOTOR
RED BUTTON
6.
Press and hold the
red button
until you reach
step 8.
7.
On the wall control, press the
opposite
direction button
of the one selected in step 3.
Let the motor move and press the
stop button
when the slats reach the second traversing
desired limit.*
OPPOSITE DIRECTION
BUTTON
STOP BUTTON
5.
On the wall control, press the
opposite
direction button
of the one selected in step 3, this
will bring the carriers to the initial position (in the
middle of the track) in which they first were.
The first traversing limit has now been set.
1.
Set DIP
switches
No. 2
and
No. 4
in the
ON
position
to set the traversing limits.
2.
Press and hold the
blue button
until you reach
step 4.
TRAVERSING MOTOR
BLUE BUTTON
TRAVERSING MOTOR
BLUE BUTTON
4.
You can now release the
blue button
.
1
DIP ON
2 3 4
OPPOSITE DIRECTION
BUTTON
3.
On the wall control, press either
direction
button
. If the button you pressed does not start
the traverse movement of the carriers, try the
opposite
direction button
.
Press
stop button
when the carriers reach the
first desired limit at one side of the track*.
Remember which
direction button
you selected in
this step.
DIRECTION BUTTON
STOP BUTTON
Содержание VTi 6-710-VB-00110
Страница 20: ......
