SBX IP - IP8000 Phone Configuration Guide
IP Endpoint Licensing
page - 3
Remote Phone Set Up Instructions
•
You will also need a 24-button SBX digital telephone to set up the system.
•
For a typical test-bench or demonstration setup, you need four connections to a LAN
switch: each via a straight-through CAT5E patch cord as shown above.
•
You may use the following IP addressing information to set up a closed demo of the IP
phone.
NOTE
:
These addresses will not function in a wide-area network or the Internet,
they are for testing
and demonstration purposes only
.
VoIP Card
KSU LAN Port
IP Phone
Your PC
IP Address
192.168.1.4
192.168.1.3
192.168.1.5
192.168.1.2
Subnet Mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Default Gateway
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
Release 3.5
June 2010
