Vertical IP8012 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 16

Vertical IP8012 Скачать руководство пользователя страница 16

Program IP Phone Attributes

page - 14

Remote Phone Set Up Instructions

SBX IP - IP8000 Phone Configuration Guide

Assign VoIB Slot/Port Usage

1. Press PGM.
2. Dial 380 (VoIB Slot Assignment).
3. Press Flex Button (VoIB Slot).
4. Dial 10 (Slot Number to Program).
5. Press Save.
6. Press Flex button 2 (RSG/IP channel Assign).
7. Dial 10 (Slot Number).
8. Dial 4 (or number of channels to reserve for IP Phones).
9. Press Save.

Assign VoIB IP Station

1. Press PGM.
2. Dial 381 (RSG/IP No Assign).
3. Press Flex Button 2.
4. Dial the number of IP Stations you wish to program (e.g., 04).
5. Press Save.
6. Reset the System and VoIP card.

Program IP Phone Attributes

The number of bins available to program will correspond to the number of IP phones

programmed in PGM 381.

1. Press PGM.
2. Dial 386 (IP Phone Attrib).
3. Dial the Bin Number (e.g., 01 This would be the first IP Station).
4. Press Flex Button 1.
5. Dial the MAC Address of the IP Phone.

NOTE

:

S

=A, #=B, NAV Left=C, NAV Right=D, NAV Up=E, NAV Down=F

6. Press Save.

Release 3.5

June 2010

«
...
14
15
16

Содержание IP8012

















Отзывы:

Нет отзывов