IP Endpoint Licensing
page - 2
Remote Phone Set Up Instructions
SBX IP - IP8000 Phone Configuration Guide
IP Endpoint Licensing
Nomad SP requires a per-seat license. Two seats are automatically included. You do not have
to install activation codes for these two seats.
•
IP8000 series and NomadIP wireless phones require no license.
NOTE
:
Entering IP address information to the KSU database from a digital phone is performed differently
from programming IP settings in an IP remote phone.
Digital Keyset on the KSU
Enter digits in groups of three, with no punctuation or decimal.
EXAMPLE
:
To program the address 192.168.1.3, dial
192168001001
> Save
IP Phone
Enter digits with an asterisk [
] as the decimal.
EXAMPLE
:
To program the address 192.168.1.10, dial
192*168*1*10
> Save
IP Addressing
To begin, you will need to:
1. Obtain IP addresses from the network administrator for the location in which you are
setting up the SBX IP system.
2. Make a note here of the information gathered above for reference while programming
the system.
VoIP card
(VOIB)
KSU LAN Port
IP Phone
(may be DHCP)
Your PC
(may be DHCP)
IP Address
Subnet Mask
Default Gateway
Release 3.5
June 2010
