SBX IP - IP8000 Phone Configuration Guide
Configuring IP Phone Settings
page - 11
Remote Phone Set Up Instructions
3. Press the until DHCP? appears.
•
If IP Addressing is assigned via DHCP, this should be enabled.
•
If IP Addressing is Static, this sho
•
Press # until the display shows the correct state.
•
Press Hold/Save to retain the entry.
4. Press the until MFIM IP ADDRESS (DOT:*) appears.
•
This is the VOIB IP Address Field. MFIM = VOIB.
•
Enter the IP Address on the dial pad.
•
Press the
S
to enter a decimal/period (.).
EXAMPLE
To enter 192.168.1.10, dial 192*168*1*10. Press Hold/Save to
retain the entry.
5. Press the until ROUTER IP ADDRESS(DOT:*) appears. This is the Default
Gateway IP Address Field. If IP Addressing is being assigned you won’t need to
program this field. If IP Addressing is statically assigned enter the IP Address of the
Default Gateway and press Hold/Save.
6. Press the until PHONE NET MASK(DOT:*) appears.
•
This is the Subnet Mask associated with the IP Address of the phone.
•
If IP Addressing is being dynamically assigned you won’t need to program this
field.
•
If IP Addressing is statically assigned enter the IP Address of the Default Gateway
and press Hold/Save.
M F I M I P A D D R E S S ( D OT: * )
x x x . x x x . x x x . x x x (
T h e V O I B I P A d d r
)
R O U T E R I P A D D R E S S ( D OT: * )
x x x . x x x . x x x . x x x (
D e f a u l t G / W I P Ad d r
)
P H O N E N E T M A S K ( D OT: * )
x x x . x x x . x x x . x x x (
S u b n e t M a s k
)
Release 3.5
June 2010
