Vertical 9112i, Руководство пользователя

Страница: 124 / 146

Using a SIP Phone 5
-
10
About Wave Digital Phones
Wave Phone User Guide
Using a SIP Phone
Line Keys
All phones have a primary line key. Your phone might also include one or more secondary line
keys and outside line keys. Line keys are idle when there is no LED lit beside them. Lines with
a red LED are in use and you cannot join the call. Lines with a green LED indicate calls
connected to your phone. Lines with a flashing green LED indicate calls connected to other
phones that allow you to join the call.
Primary Line Key
Your primary extension number is assigned to one of the programmable feature keys on your
phone. Your extension number should appear on the label strip next to your primary line key. If
your phone is idle and you take it off hook, the LED next to the line key will light up, and the
extension number will be displayed.
Secondary Line Keys
You might have one or more secondary lines assigned to your phone. These additional lines
might be primary lines that appear on other phones. You can use these additional lines to make
or receive phone calls.
Display Information
The Edge 100 and Impact SCS phone models all provide a back-lit, two-line display to give you
additional call information.
When you are not using your phone, line one of the display shows the date and time, and line
two of the display shows either:
• the number of voicemail messages in your mailbox
(for example,
2 Msg
)
OR
•
VMAIL
and
MENU
if no messages are in your voicemail box
While you are dialing, line one of the display shows your extension number and line two
displays the digits as they are dialed. During an active call on your primary line, line one
displays the other party’s name or the trunk group your call is using, and line two lists the other
party’s phone number.
The display does not show caller ID information on an inbound call if that information is
blocked by the other party, or if your phone service provider does not send caller ID. The display
shows “Private” or inbound trunk group information instead. A call timer displays the length of
time your call is connected.