22
EVX-S24 O
PERATING
M
ANUAL
PRI-2 S
ET
Toggle the current channel to the priority channel 2 “enable”
and “disable”. When the current channel will be set to the
PRI-2 channel, the display indicates the “
P
” icon briefl y.
PRI-2 D
ISABLE
Press the assigned
PF
key, the display indicates “
PRI2
DI
” briefl y, and disable the priority channel 2 of the group
temporarily.
Press again the assigned
PF
key, the display indicates
“
PRI2 EN
” briefl y, and enabling the priority channel 2 of
the group.
S
CAN
Activates the Scanning feature which is used to monitor
multiple channels programmed into the transceiver. When
scanning, the transceiver will check each channel for the
presence of a signal and will stop on a channel if a signal
is present.
Note
: Your dealer may have programmed your radio to
stay on one of the following channels if you press the
PTT
switch during scanning pause:
Current channel
“Scan Pause” channel (“Talk Back”)
“Last Busy” channel
“Priority” channel (PRI-1 or PRI-2)
“User Programmed” channel (“Select Channel”)
G
ROUP
S
CAN
The scanning feature is used to monitor multiple chan-
nels programmed into the transceiver. While scanning, the
transceiver will check each channel of the programmed
group for the presence of the signal, and will stop on a
channel if a signal is present.
Press the assigned
PF
key to activate the scanning on the
selected groups.
Press again the assigned
PF
key to disable the group scan
mode, and receive the channel which was chosen when
pressed the
PF
key.
When the Group Scan is activated, the display will indi-
cate “
GRP SCAN
”, and current group channel number
will appear at the upper right corner on the display.
A
DVANCED
O
PERATION