28
EVX-S24 O
PERATING
M
ANUAL
Radio Check
You may check the radio status of the selected Contact
Alias.
Press the assigned
PF
key to activate the Call feature.
Press the [
]/[
] keys to recall the Contact Alias you
wish to check, then press the [
MODE
(
)] key.
Press the [
]/[
] keys to select “
RADIO CK
”.
Press the [
MODE
(
)] key to transmit the Radio Sta-
tus command to the designated radio. If the designated
radio is alive, the designated radio transmits the ACK
command, and then your radio’s display indicates
“
ACK RECV
”. If not, your radio’s display indicates
“-
NO ACK-
”.
Revive
You may revive the stunned radio by following the listed
steps.
Press the assigned
PF
key to activate the Call feature.
Press the [
]/[
] keys to recall the Contact Alias you
wish to revive, then press the [
MODE
(
)] key.
Press the [
]/[
] keys to select “
REVIVE
”.
Press the [
MODE
(
)] key to transmit the revive
command to the disabled radio. When the stunned ra-
dio receives the revive command, the stunned radio re-
vives, and then transmits the ACK command automati-
cally. Your radio’s display indicates “
ACK RECV
”. If
your radio’s display indicates “-
NO ACK-
”, the revive
command did not succeed.
Stun
You may stun a selected radio in your fl eet (temporarily
disable from transmitting/receiving) forcibly by remote
control.
Press the assigned
PF
key to activate the Call feature.
Press the [
]/[
] keys to recall the Contact Alias you
wish to stun, then press the [
MODE
(
)] key.
Press the [
]/[
] keys to select “
STUN
”.
Press the [
MODE
(
)] key to transmit the stun com-
mand to the designated radio. If the designated radio
is alive, the designated radio transmits the ACK com-
mand and stuns it. If not, your radio’s display indicates
“-
NO ACK-
”, the disabling command did not succeed.
The stunned radio will revive by the “Revive” function
described previously.
S
TATUS
U
P
/D
OWN
Select a 5-Tone status code from the pre-defined status
list.
S
TATUS
C
HECK
Check the 5-Tone receive status code. When you press the
assigned
PF
key, the display will indicate the “Message”
corresponding to the receive status condition per the pre-
defi ned status list.
A
DVANCED
O
PERATION
