Vertex Standard EVX-5400, Руководство по эксплуатации

Страница: 28 / 40

EVX-5400 O
pErating
M
anual
26
s
tatus
s
Et
You can change the 5-tone status code using this function:
r
Press, (or press and hold), the assigned
PF
key to change the 5-tone status
code.
r
Select the desired digit to be changing by pressing the [
P1
]/[
P2
] keys, then
change the number by pressing the [

]/[

] keys.
r
Press the [
P4
] key to store the new number to the 5-tone status code. The dis-
play indicates “
- SET -
” briefly, then reverts to the normal channel indication.
You may cancel the new setting by pressing the [
P3
] key. In this case, the dis-
play indicates “
-CANCEL-
” briefly.
Note
: If the optional MH-75
A8J
16-Keypad Microphone is used, you may enter the
5-tone status code directly from the microphone’s numeric ([
0
] - [
9
]) key.
s
tatus
u
p
/d
oWn
Press, (or press and hold), the assigned
PF
key to select a 5-tone status code from
the pre-defined status list.
s
tatus
c
HEcK
Press, (or press and hold), the assigned PF key to check the 5-tone receive status
code. When you press this key, the display will indicate the “Message” corre-
sponding to the receive status condition per the pre-defined status list.
d
uty
Press, (or press and hold), the assigned
PF
key to toggle the Duty function of the
2-tone, 5-tone or MDC1200
®
decoder “On” and “Off”.
When the Duty function is set to “On”, the display indicates “
DUTY ON
” briefly
and the user will always hear (depending on the sub-audio signaling) all traffic on
the paging channel. The radio will sound the paging alert when it receives the pro-
grammed 2-tone, 5-tone or MDC1200
®
.
When the Duty function is set to “Off”, the display indicates “ DUTY OFF ” briefly
and the user will NOT hear normal radio traffic on the paging channel. The radio
will sound the paging alert and unmute only when it receives the programmed
2-tone, 5-tone or MDC1200
®
.
Id c
HEcK
This function allows logged ID of the DTMF Signaling or 5-tone Signaling to be
reviewed and relayed (5-tone Signaling only) to a specific station:
r
Press, (or press and hold), the assigned
PF
key to display the logged ID of the
DTMF Signaling or 5-tone Signaling.
a
dvancEd
o
pEratIon