Vertex Standard EVX-5400, Руководство по эксплуатации

Страница: 6 / 40

EVX-5400 O
pErating
M
anual
4
c
ontrols
& c
onnEctors
Front Panel
Important!
- All buttons located on the Front Panel are Programmable Function
( PF ) keys, configured according to your network requirements and programmed
by your Vertex Standard dealer. The instructions below describe a typically-config-
ured radio.
 PWR ( ) Button
Press and hold in this button for 2 seconds to toggle the transceiver’s power
“on” and “off”.
 VOL Knob
Turn this control clockwise to increase the volume.
 Microphone Jack
Connect the microphone plug to this jack.
 TX/BUSY Indicator
Indicates transceiver’s Transmit/Receive Status.

[
P1
]
-
[
P4
]
Keys
(
Programmable Function Keys
)
These keys can be set up for special applications, such as High/Low power
selection, Monitor, Talk-Around, etc., as determined by your network require-
ments and programmed by your Vertex Standard dealer.

[

]/[

]
Keys
(
Programmable Function Keys
)
In the factory default, pressing either key changes the current channel.
 
   
