Vertex Standard EVX-5400, Руководство по эксплуатации

Страница: 23 / 40

EVX-5400 O
pErating
M
anual
21
c
odE
u
p
/d
oWn
Press, (or press and hold), the assigned PF key to select a 2-Tone or 5-Tone en-
code code from the pre-programmed encode list.
c
odE
s
Et
You can change the desired digit of the 5-Tone encode code using this function:
r
Press, (or press and hold), the assigned PF key.
r
Select the desired digit using the [
P1
]/[
P2
] keys, then change the number us-
ing the [

]/[

] keys.
r
Press the [
P4
] key to store the new setting. The display indicates “
- SET - ”
briefly, then reverts to the normal channel indication.
You may cancel the new setting by pressing the [
P3
] key. In this case, the dis-
play indicates “
-CANCEL-
” briefly.
Note
: If the optional MH-75
A8J
16-Keypad Microphone is used, you may enter the
5-Tone encoding code directly from the microphone’s numeric ([
0
] - [
9
]) key. In
this case, you may set and cancel the setting by the microphone’s [ C
] (for cancel)
and [
D
] (for set) key.
s
pEEd
d
Ial
Your Vertex Standard dealer may have pre-programmed Auto-Dial telephone num-
ber memories into your radio.
To dial a number:
r
Press, (or press and hold), the assigned
PF
key.
r
Press the [

]/[

] keys to select the Auto-Dial memory number which is pre-
programmed by your Vertex Standard dealer, then press the
PTT
switch. The
DTMF tones sent during the dialing sequence will be heard in the speaker.
Note : If the optional
MH-75
A8J
16-Keypad Microphone is used, you may select
the Auto-Dial memory number by the microphone’s numeric ([ 0
] - [
9
]) key.
dtmF c
odE
s
Et
(
This function requires the Optional
MH-75
A8J
16-Keypad Microphone
)
r
Press, (or press and hold), the assigned PF key to start entering the DTMF di-
aling sequence.
r
Enter the DTMF digit from the microphone’s numeric ([ 0
] - [
9
]) key.
r
After entering all DTMF digits, press the
PTT
switch to transmit the DTMF
code.
a
dvancEd
o
pEratIon