8
www.versitron.com
2.3.2
SFP Module Settings
There are no user configurable SFP settings
Table 4: SFP Rate Jumper Settings (J2)
Jumper
Jumped
Functional Description
J2
Off*
Do Not Change
*Note: Factory Setting: Do Not Change
2.3.3
Default Jumper
The remaining jumper (J1) is open and should not be changed.
2.4 Power Requirements
The F271XA products are designed to operate from an AC power transformer or a DC
power source in the range of +10 to +16 VDC.
2.4.1
Installation with AC Power
Before inserting the VERSITRON power transformer, PSAC08 (US) or PSAC09 (EUR),
Figure 3: Switch and Jumper Locations
Illustration 3: Switch and Jumper Locations