1
—
Installation of the VX-MD4024
24 / 44
localhost:>enable
//go to enable mode
localhost:%configure
//go to configuration mode
localhost:(conf)#firmware write
<FTP server ip address> <username>
<password> <filename> {
image
|
bootloader
} [noreboot]
//get files from FTP server and write to FLASH.
// The word “noreboot” in this command is optional. If you add it in the command,
you must reboot the system manually for the changes to take effect; otherwise the
system will reboot automatically once the firmware/bootloader is updated.
Description
Perform software image or bootloader remote download.
Syntax
firmware write <ip> <username> <password> <string> {image |
bootloader} [noreboot]
Parameter
Name
Description
<ip>
FTP server IP address
Type
: Mandatory
<username>
Username
Valid values
: 1 ~ 31 characters
Type
: Mandatory
<password>
Password
Valid values
: 0 ~ 31 characters
Type
: Mandatory
<string>
Image path and filename
Valid values
: 1 ~ 64 characters
Type
: Mandatory
image
Perform remote download for the software image
Type
: Mandatory
bootloader
Perform remote download for the bootloader
Type
: Mandatory
noreboot
No Reboot after command commplete.
Must reboot system manually for the changes to take effect!
Type
: Optional
Note:
Getting file from FTP Server and writing to Flash ROM needs several minutes; you can
get latest status by using command
‘
show firmware status
’
. During the Flash writing
process,
you MUST NOT turn off or reset the system.
4. After system restarts, login the CLI again and use the
‘
show firmware partition
’
or
‘
show
bootloader
’
command to check if the software upgrade is successful.
In Web:
Please refer to VX-MD4024
Web Configuration Tool Guide
.