Versa Flame BY12-084-029-97, Инструкции по сборке и эксплуатации

Страница: 14 / 44

BY12-084-029-97 Eng P. 14 20111105-V0
contact with fire. When opening the lid, keep hands, face and body a safe
distance from hot steam and flame flare-ups.
z After each use, clean the grill thoroughly and apply a light coat of vegetable oil
to the interior to prevent rusting. Cover the grill to protect it from excessive
rusting.
z Grill is hot when in use. To avoid burns:
z DO NOT attempt to move the grill
z
Wear protective gloves or oven mitts.
z DO NOT touch any hot grill surfaces.
z DO NOT wear loose clothing or allow hair to come in contact with grill.
PREPARATION FOR USE & LIGHTING INSTRUCTIONS
WARNING
OUTDOOR USE ONLY. DO NOT OPERATE GRILL INDOORS OR IN AN ENCLOSED SPACE
Never use grill indoors. Carbon Monoxide poisoning can lead to death.
Curing your grill
Prior to your first use of the Grill, follow the instructions below carefully to cure your grill. Curing
your grill will minimize damage to the exterior finish as well as rid the grill of paint odor that can
impart unnatural flavors to the first meal prepared on the grill.
IMPORTANT: To protect your grill from excessive rust, the unit must be properly cured and
covered at all times when not in use.
Step 1
Lightly coat all interior surfaces of the grill with vegetable oil or vegetable oil spray.
Step 2
Follow the instructions below carefully to build a fire. You may use charcoal and/or wood as fuel for
the grill (see “Adding Charcoal/Wood During Cooking” section of this manual).
WARNING
Use only a high grade plain charcoal or charcoal /wood mixture.
NOTE: To extend the life of your grill, make sure that hot coals and wood do not touch the
walls of grill.
IF USING CHARCOAL CHIMNEY STARTER, PROCEED TO STEP 5.
If you choose to use charcoal lighting fluid, ONLY use charcoal lighting fluid approved for lighting
charcoal. Do not use gasoline, kerosene, alcohol or other flammable material for lighting charcoal.
Follow all manufacturer’s warnings and instructions regarding the use of their product. Start with
3.3 lb(1.5 kg ) of charcoal. This should be enough charcoal to cook with, once the curing process
has been completed. Place the charcoal in the center of each charcoal grate.
Step 3
Saturate charcoal with lighting fluid. With lid open, wait 2 to 3 minutes to allow lighting fluid to soak
into charcoal. Store lighting fluid a safe distance from the grill.