14
OVEN BURNER
It carries out normal “oven cooking”.
The gas flow to the burner is regulated by a thermostat which allow to maintain the oven
temperature constant.
The control of the temperature is assured by a thermostatic probe positioned inside the
oven.
The probe must be always kept in its housing, in a clean condition, as an incorrect posi-
tion or encrustment may cause an alteration in the control of the temperature.
OVEN THERMOSTAT
The numbers printed on the control knob (fig. 3.1) indicate the increasing oven tempera-
ture value (see temperature table near the control knob).
Left column of the temperature table refers to oven burner used in combination with the
fan motor while right column refers to oven burner used in the normal convection mode
(without fan motor).
To regulate the temperature, set the chosen number onto the control panel indicator.
The position “
BROIL
” serves only to turn on the broil burner.
OVEN LIGHT AND FAN MOTOR
The oven light and the fan motor are controlled by a switch knob on the control panel
(fig. 3.2).
To light up the oven lamp turn the knob anti-clockwise to “
LIGHT
” position.
To operate the fan motor turn the knob clockwise to “
LIGHT & FAN
” position. In this set-
ting also the oven lamp is lit.
WARNING:
The switch knob can be turned only clockwise from “
OFF
” to “
LIGHT & FAN
”
position and anti-clockwise from “
OFF
” to “
LIGHT
” position.
The switch knob
DO NOT TURN
from “
LIGHT & FAN
” to “
LIGHT
” position.
DO NOT FORCE.
IMPORTANT NOTE:
The fan motor can be used in combination only with the oven bur-
ner. A safety device switches off the fan motor when the gas oven/broil control knob is
turned on “
BROIL
” position.
OK
OK
NOT TURN
3
FAN
GAS OVEN
KNOB
SETTING
GAS
OVEN
°F
°C
°F
°C
200
93
1
200
93
240
116
2
245
118
285
141
3
270
132
330
166
4
345
174
375
191
5
380
193
420
215
6
455
235
475
246
7
505
263
530
277
8
555
291
Fig. 3.2
Fig. 3.1