14
83D4009
VLI31 Fireplace Insert
VeNtING INStALLAtION
FP1961
baffle adjustment
9/08
Loosen Four (4) Screws to Adjust
Bottom View
closed Position
Bottom View
Open Position
FP1961
Figure 10 -
Baffle Plate
Adjust for extended vertical applications if needed.
3. Attach the slotted baffle plate.
Figure 10
4. Feed exhaust flex through hole on top of insert and
attach to manifold with hose clamp (not provided) or
other approved methods (check local codes). Insure
the gasket is in place before securing the flex to the
manifold.
NOte: Sealant is not required to assemble fireplace
venting. Do not use silicone sealant at the inner flue
exhaust connections.
5. Re-attach exhaust baffle and manifold assembly in
reverse order of Step .
6. Re-attach glass door in reverse order.
NOte:
The VLIDV has an adjustable baffle and may be
adjusted as needed by loosening four (4) screws.
Figure
10.
INtAKe MANIFOLD VeNt INStALLAtION
Before insert is placed back into fireplace opening, attach
intake flex pipe to intake manifold, located in rear lower left
corner with hose clamp (not supplied) or other approved
method.
exhAuSt MANIFOLD ReMOVAL AND VeNt
INStALLAtION
The exhaust manifold is shipped attached to insert. It may
be removed to allow tight installation.
1. Remove glass door assembly following instructions on
Page 39, Figure 54.
. Lightly tap on flange of exhaust baffle assembly towards
you until disengaged. Remove baffle, manifold and
gasket from unit.
Figure 9
FP1960
manifold assembly
9/08
Figure 9 -
Remove Manifold and Attach to Flex Vent
FP1960
manifold assembly
9/08
Gasket
Manifold
Baffle
Assembly
FP1960
Front View
Side View
Flex Vent
Содержание VLI31DVN
Страница 44: ...44 83D4009 VLI31 Fireplace Insert...
Страница 45: ...83D4009 VLI31 Fireplace Insert 45...
