21
DVA4136 Series Direct Vent Gas Fireplace
10010270
Only glass approved by CFM Corporation
should be used on this fireplace.
•
The use of any non-approved replacement glass will
void all product warranties.
•
Care must be taken to avoid breakage of the glass.
•
Do not operate appliance with glass front
removed, cracked or broken.
•
Replacement glass (complete with frame
window) is available through your CFM
Corporation dealer and should only be installed
by a licensed qualified service person.
Operating Instructions
Glass Information
FP1228
remove glass frame
11/02
Lower Clamps
Window
Frame As-
sembly
Pull
Clamp
Hook
Push
Clamp
Handle
Window
Frame
Assembly
FP1228
Fig. 36
Window frame assembly removal.
�������
�
���������
�����
������������
������������
������
�������������
�����
���������������
���������������
The top louvre
panel is removed
by lifting the
panel vertically
and pulling it
away from the
appliance. (Fig.
34)
The lower access
door is hinged
along the bottom
edge and is
folded down to
allow access
1. Turn the fireplace OFF (including the pilot)
2. If the unit has been operating allow time for the
components to cool.
3. If the unit has the standard louvre accessory, follow
the “Louvre Removal” section above. If the unit has
one of the optional face kits, open the bottom access
panel and remove the two (2) screws securing the
bottom of the trim to the fireplace. Remove the two
(2) screws securing the top of the trim to the bracket
Window Frame Assembly Removal
Louvre Removal
1.
2.
FP1227
Louvre removal
11/02
Louvre
Glass Panel
FP1227
Fig. 34
Remove top louvre assembly.
above the glass door frame. (Fig. 35) After the
glass has been cleaned, reassemble the trim to the
fireplace in reverse order.
������
���������������
����
Remove
Screws
Remove Screws
FP1834
Fig. 35
Remove trim screws.
4. Remove the top louvre assembly.
5. Open the lower louvre panel.
6. Release the two clamps securing the lower edge of
the frame by pulling down on the handles. (Fig. 36)
7. Tilt the glass frame out slightly at the bottom, lift the
frame up and away from the fireplace.
8. To replace the glass frame reverse the procedure.
