SSI30 Wood Insert
2
63D4004
Congratulations on your choice of a Vermont Castings Savannah. With this purchase, you
made a commitment to make the hearth a place of warmth, beauty and comfort in your home.
At Vermont Castings, we share that joy and appreciation of the hearth, and we show it in all our
cast iron inserts and fireplaces.
As you become acquainted with your new insert, you will find the aesthetic appeal of cast iron
is matched only by its superb capacity to absorb and radiate heat.
Also, Vermont Castings products are among the cleanest burning wood inserts and fireplaces
available today. As an owner of a Vermont Castings insert, you are making a strong statement
for pollution-free energy. But clean burning depends on both the manufacturer and the operator.
Please read this manual carefully to understand how to properly operate your insert.
At Vermont Castings, we are equally committed to your satisfaction as a customer and that is
why we maintain an exclusive network of the finest dealers in the industry. Chosen for their
expertise and dedication to customer service, our dealers are factory-trained and know each
Vermont Castings product in detail. Feel free to contact your Authorized Vermont Castings Dealer
anytime you have a question about your insert or its performance.
We have built your insert with the utmost care. With normal use and proper care, it will provide
you with many years of service.
This manual contains valuable instructions on the installation and operation of your Vermont
Castings insert. You will also find useful information on assembly and maintenance procedures.
We urge you to read the manual thoroughly and to keep it as a reference.
Sincerely,
All of us at Vermont Castings
This manual describes the installation, operation, and maintenance of the Vermont Castings
Savannah wood burning heater. This heater meets the U.S. Environmental Protection Agency’s
emission limits for wood heaters sold on or after July 1, 1990. Under specific test conditions this
heater has been shown to deliver heat at rates ranging from 11,000 to 30,600 Btu/hr.
The insert has been tested and is listed by OMNI - Test Laboratories, Inc. of Portland, Oregon.
The test standards are ANSI/UL-1482 for the United States, and ULC S628 for Canada. The
Savannah is listed for burning wood only. Do not burn other fuels.
Installation or service of this woodburning insert should only be completed by a qualified installer,
preferably NFI or WETT (Canada) certified.
Please read this entire manual before you install and use your new insert. Failure to follow
instructions may result in property damage, bodily injury, or even death.
WElCOME
NOTICE
SAvE ThESE INSTRuCTIONS FOR FuTuRE
REFERENCE
