SSI30 Wood Insert
14
63D4004
INSTAllATION
blOWER ANd ASh lIp ASSEMblY
1. Attach the wires as shown in
Figure 20
making sure you push all connections together tightly
2. Insert the snapstat into its holder as shown in
Figure 19
, making sure that the connectors are
not touching the insert.
3. Use the two bolts saved from the front shipping bracket to secure the blower to the insert.
4. Make sure all wires are away from the insert front.
5. The ash lip and surround can now be installed by placing the keyhole cutouts over the bolt heads
shown in
Figure 18
.
White
Black
White
White
Tan
White
Black
Green
Green
Black
Black
Tan
1
2
3
4
5
6
7
8
8
Detail View
9
On
Off
Tan
Tan
ST1081
SSI30 WIRING
Figure 20
ASSEMblINg ThE SuRROuNd
To assemble the surround it is best to lay the three sec-
tions face down on a soft flat surface. The foam package
material works well for this.
Align the two pins on the top section with the holes on the
side pieces as shown in
Figure 21
. carefully slide the sec-
tions together. When moving the assembled surround it is
best to hold it by the sides and not the top.
ST1082
assemble surround
Figure 21
ST1082
