background image

16

Montpelier Medium Insert

30004403

Yearly Spring Cleaning:

• 

Remove ash from the firebox and replace with a 
moisture-absorbing material (such as kitty litter) 
to keep the interior of the stove dry.

• 

Touch up painted surfaces with black paint.

Flex  Connection:

Two Months:

• 

Inspect the chimney and flue connection. Clean 
the system if necessary.

Yearly Spring Cleaning:

• 

Disassemble the flue connection and take it 
outdoors for inspection and cleaning. Replace 
weak sections of connector.  

• 

Inspect the chimney for signs of deterioration. 
Repairs to a masonry chimney should be made 
by a professional mason. Replace damaged 
sections of prefabricated chimney. Your local 
Vermont Castings’ dealer or a chimney sweep 
can help determine when replacement is 
necessary.

• 

Thoroughly clean the chimney.

For parts and information about your insert, contact 
your Vermont Castings authorized dealer. For the name 
of the dealer nearest you, contact:  
 

MHSC

 

149 Cleveland Drive

 

Paris, KY  40361

 

800-668-5323

Optional Accessories

Georgian Cast Surround
 

Model 

Color

 

30DVSGTKCB 

Classic Black

 

30DVSGTKB 

Ebony

Mead Cast Surround
 

Model 

Color

 

MEAD3CB 

Classic Black

 

MEAD3EB 

Ebony

 

MEAD3BS 

Biscuit

Caprice Cast Adjustable Profile Surround
 

Model 

Color

 

CAPCB 

Classic Black

 

CAPEB 

Ebony

Bevel Cast Trim Surround

 

Model - LHEABSL 

Steel Surround
 

Model 

Color

 

LHE30SSB 

Classic Black (Small)

 

LHE30SLB 

Classic Black (Large)

 

LHE30SLGA 

Antique Brass (Large)

Extended Trim Plate

 

LHE30TCK (Cannot be used alone)

DIY Inside Fit Surround Kit

 

DIYSK - Includes template, brackets and instruc-

tions. Additional materials must be purchased locally.

3” Extension Package
 

Model 

Color

 

M3PKCB 

Classic Black

In the event of component failure, it is very important to 
replace with equipment equivalent to the Vermont Cast-
ings original parts.

Содержание Montpelier





















Отзывы: