25
Chateau™ Decorative Gas Appliance
20009543
8. Position the log left grate. (Fig. 47) Hold the log with
your left hand with the pointed end toward the right
and the flat surface facing down. Set the log on the
inside of the fettle toward the left over the overlay
and hook the branch and the pointed end of the log
through the first and second opening on the fettle
by using the second and third tine. When the log is
in place, it will be sitting at an angle in the air above
the overlay. Repeat this step for opposite side.
10. Position the log right grate. (Fig. 50) Hold the log
with your right hand with the pointed end toward the
left and the flat surface facing down. Hook the notch
located on the right corner of the log through the first
opening on the right hand side of the fettle using
the first tine. Bring the log toward you until it comes
in contact with the fettle. Then rest the pointed end
over the middle log positioned in Step 9. Repeat this
step for opposite side.
�����
��������������
����
Log Left Grate
LG427
Log Left Grate
Fig. 47
Position log left grate.
9. Position the log middle. (Fig. 49) Familiarize yourself
with notches located on the flat surface of the log
on each end. (Fig. 48) These notches are utilized in
positioning the log. Hold the log with the flat surface
facing down and the burned out end closer to you.
NOTE
: Position this log through the side with the con-
trol valve box on the left side. Set the log using the
notches mentioned earlier located on the flat surface
of the log and using the fourth “middle” tine on each
fettle. When the log is in place, the notches located
on the bottom of the log will set directly above the
fourth “middle” tine on each fettle.
�����
����������
�����������
����
Notch
Notch
NOTE:
These notches will
fit onto the fourth middle
tine of each fettle.
Bottom View
LG428
Fig. 48
Use notches on bottom side of log to set in place.
�����
����������
����
Log Middle
Fourth “Middle” Tine
LG429
Fig. 49
Position log middle.
�����
���������������
����
Log Right Grate
LG430
Fig. 50
Position log right grate.
11. Position the log front right. (Fig. 51) Hold the log
with the two (2) branches toward you. Set the left
branch on the inside of the second tine of the fettle
and drop the right branch on the overlay behind the
log positioned in Step 7. Lay the other end of the log
over the notch located on the log positioned in Step
10. Make sure to clear the opening on the overlay
when looking straight down.
12. Position the log front upper right. (Fig. 52) Hold the
log with narrow end toward you. Set the narrow end
over the flat notch on the log right grate positioned
in Step 10. Lay the wide end of the logs over the
branch on the log left grate positioned in Step 8.
