Vermeiren V100, Инструкция по эксплуатации

Страница: 10 / 248

EN
V100
2010-11
Page 8
2.4 Mounting or removing of the footrests
The mounting of the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchairs frame and mount the tube hood

into
the frame.
2. Swing the footrest inwards till it clicks in position.
3. Swing the foot plate downwards.
To take off the footrests:
1.
Pull handle

.
2. Swing the footrest to the outside of the wheelchair till
it comes loose from the guidance.
3. Pull the footrest from tube hood

.
2.5 Operating the brakes
L
WARNING:
The brakes aren't used to slow down the wheelchair during
movements
–
Use the brake only to prevent the wheelchair from unintended
movements.
L
WARNING:
Good operation of the brakes is influenced by wear and
contamination of the tires (water, oil, mud, …) –
Check the condition of the tires
before each use.
L
WARNING:
The brakes are adjustable and can wear
–
Check the operation of the
brakes before each use.
To apply the brakes:
1. Push the brake handles forward till you feel a distinctive click.
L
CAUTION:
Risk of unintended movement
–
Make sure the wheelchair is on a
flat horizontal surface before releasing the brakes. Never release both brakes
simultaneously.
To release the brakes:
1. Release one brake by pulling the handle backwards.
2. Hold the hand-rim of the release wheel with your hand.
3. Release the second brake by pulling the handle backwards.