Jazz S50
2022-03
Before use
7
EN
NL
2.5 Folding/Unfolding the wheelchair
Chance of pinching – Do not place fingers between the components of the
wheelchair.
To fold:
1. Fold or remove the footplates (see § 3.1).
2. Take the seat on the front side and backside and pull it up.
3. Push the handgrips to fold up the wheelchair further.
To unfold:
1. Position yourself behind the wheelchair.
2. Use the handgrips to open the wheelchair as much as possible.
3. Position yourself at the front of the wheelchair.
4. Push both seating tubes down until they are fixed in position.
2.6 Mounting/Taking off the rear wheels (if available)
To remove the rear wheels
1. Press and hold button (1) while sliding the wheel axle out of the
hole of the frame.
2. Repeat this for the other wheel and place the wheelchair gently
on the rear frame tubes.
To install the rear wheels
1. Take one of the rear wheels and lift the wheelchair on one side.
2. Press and hold button (1) while sliding the wheel into the axle
bushy.
3. Release the button to lock the wheel. Make sure it clicks into
place.
4. Repeat this for the other wheel.
5. Ensure that both wheels are firmly secured.
2.7 Storage
Make sure that your wheelchair is stored in a dry environment to prevent mould from
growing and the upholstery from being damaged, see also chapter 6.
CAUTION
