Vermeiren Eclips XXL, Инструкция по эксплуатации

Страница: 17 / 116

Eclips XXL
2013-04
Page 15
2. Loosen the bolts so the brake
mechanism can slide over the guide .
3. Pull the brake mechanism over the guide to
the desired position.
4. Retighten the bolts .
5. Check working of the brakes.
6. If necessary repeat the above steps until the
brakes are adjusted well.
3.6 Adjusting of the footrests
3.6.1 Length of the footrests
L
L L
L
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
Adjust the length of the footrests as follow (in eight different positions):
(Fig A)
1. Remove the screw .
2. Adjust the length of the footrest to a comfortable length.
3. Tighten the screw
➁
properly.
3.6.2 Depth of the footplate
Adjust the depth of the footplate as follow (in three different positions):
1. Remove the screws .
(Fig A)
2. Adjust the depth of the footrest to a comfortable position
(Fig B)
.
Position 1: hole 1 and 3
Position 2: hole 2 and 4
Position 3: hole 3 and 5
3. Tighten the screws properly .
(Fig A)
4 Maintenance
For the maintenance manual of the wheelchairs refer to the Vermeiren website:
www.vermeiren.be.
A B