Vermeer S925TX, Руководство оператора

Страница: 97 / 104

S925TX Mini Skid Steer Engine Fault Codes 62-1
Section 62: Engine Fault Codes
E
NGINE
F
AULT
C
ODES
(G
ASOLINE
E
NGINE
O
NLY
)
Refer to the Engine Operations Manual for additional information on understanding and recording engine fault
codes displayed on tachometer LED, and appropriate remedial actions. Always contact your Vermeer dealer or
engine service dealer for help in correcting diagnostic trouble codes which are displayed for your engine.
The first part of the code is a six-digit S uspect P arameter N umber (SPN) which identifies the system or
component that failed, followed by a two-digit F ailure M ode I dentifier (FMI) code which identifies the type of
failure (example: high temperature). In order to determine the exact failure both parts of the code are needed.
SPN FMI DESCRIPTION CORRECTIVE ACTION
106 16
MAP high pressure
Check fuel pump and pressure sensor wiring
106 4
MAP Low Voltage
Check wiring/Contact servicing dealer
94 3
FP High Voltage
Contact servicing dealer
94 4
FP low Voltage
Contact servicing dealer
94 0 Fuel Pressure High Contact servicing dealer
94 1 Fuel Pressure Low Check fuel line routing and fuel filter/Fuel pump
168 15 Battery Voltage High Contact servicing dealer
168 17
Battery Voltage Low
Contact servicing dealer
1079 4
Sensor Supply Voltage 1 Low
Check wiring/Check battery condition
1080 3 Sensor Supply Voltage 1 High Check wiring/Contact servicing dealer
51 3 TPS1 Signal Voltage High Check wiring/Contact servicing dealer
51 3 TPS1 Signal Voltage Low Check wiring/Contact servicing dealer