Vermeer S925TX, Руководство оператора, Страница: 43 / 104

S925TX Mini Skid Steer Controls 20-9
O
PERATOR
P
RESENCE
S
YSTEM
The Operator Presence system uses a switch in the operator platform to detect the
presence of an operator. The operator must be standing on the operator presence foot
plate
(1) for the ground drive, lift/tilt functions, or auxiliary attachment drive to be
engaged.
If the operator leaves the platform while the ground drive, lift/tilt functions, and/or
attachment drive are engaged, these functions will stop. If
Lift/Tilt Joystick is in
FLOAT, it will continue to lower/float. The Auxiliary Attachment Drive Lever must be
returned to NEUTRAL before the attachment drive can be re-engaged.
The Operator Presence system is intended for your safety and must be maintained in
good functional condition. Contact your Vermeer dealer if it does not function
correctly.
P
ARK
B
RAKE
A spring-applied, hydraulic-released park brake engages the left track when the engine is OFF or the operator
leaves the platform with the engine on. Machine can travel up to 4" (10 cm) before the brake will engage.
B
OOM
L
IFT
/A
TTACHMENT
T
ILT
L
OCKOUT
O
VERRIDE
On a non-functioning machine, lower boom and tilt attachment by standing on operator platform, turning the
ignition key to the RUN position and then moving the
Lift/Tilt Joystick . In case of a discharged battery, connect
jumper battery to the discharged battery posts. Refer to “Jump-Starting Procedure,” page 22-5.
1