Vermeer S925TX, Руководство оператора, Страница: 47 / 104

S925TX Mini Skid Steer Starting Procedure 22-1
Section 22: Starting Procedure
S
TARTING THE
E
NGINE
Step 1: Stand with both feet on operator platform.
Step 2: Ensure Ground Drive Joystick (1) is in NEUTRAL.
Step 3: Move Auxiliary Attachment Drive Lever (2) to NEUTRAL.
Step 4: Move ignition switch to RUN position.
Step 5: (Diesel engine machines) If ambient temperature is below 50 ° F (10 ° C), press
and hold Glow Plug Button ( 4 ) for 10–15 seconds before starting the
machine. Continue to hold the Glow Plug Button until engine starts.
Step 6: Turn ignition switch (3) to START position; release when engine starts.
NOTICE: If engine does not start within 10 seconds, turn key OFF, wait 30 seconds,
then begin engine starting sequence over again. Do not allow the starter motor to run
continuously for more than 10 seconds.
If oil indicator light does not shut off after engine starts, shut off engine and correct
problem.
Step 7: Do not operate the engine under load until engine has warmed up.
Refer to the Engine Operation Manual for detailed information.
1
2
3
4