Vermeer S925TX, Руководство оператора

Страница: 75 / 104

S925TX Mini Skid Steer Preparation 40-11
Attachment - Remove
Step 1: Attach hydraulic power if required. Refer
to “Hydraulics - Attach,”
page 40-13
Step 2: Lower lift arms until attachment rests on
the ground. Ensure
Ground Drive and
Attachment Lift and Tilt Controls are in
NEUTRAL, and shut off engine and
remove key.
Step 3: To unlatch attachment, rotate pins (1)
180° until top of pin faces outward as
shown.
Step 4: Tilt loader mounting plate (2) forward slightly. Lower lift arms if necessary.
Step 5: Drive machine in REVERSE to detach loader from attachment.
If detaching an attachment onto a trailer with the machine positioned on the ground, locate the attachment to
prevent it from falling off.
WARNING:
Attachments could slip off the trailer after being disconnected from the machine,
resulting in a crushing injury. When disconnecting and backing the machine away from the side of
a trailer, take precautions to assure the attachments are properly secured to the trailer.
2
1