Vermeer McLaughlin V25, Руководство оператора и по техническому обслуживанию

Страница: 93 / 182

V25/VX30G/VSK25/VSK30G Vacuum Excavators Operating the Vacuum Excavator 50-11
Step 5: If equipped with Reverse Flow Control (2), place in Vacuum position. Open
Upper Gate/Tank Inlet valve.
Step 6: As long as vacuum hose is connected to the spoil tank and the engine is
running, the vacuum tool will be vacuuming. To stop vacuuming, turn off
engine.
Step 7: When vacuuming liquids, do not completely submerge vacuum tool in the
fluid. Keeping tool partially out of the fluid allows airflow through the
vacuum tube to move material more quickly to the spoil tank. This technique
is also effective when vacuuming deep vertical distances.
Step 8: When fluid level in the spoil tank reaches capacity, the engine is
automatically shut down to prevent overfilling. When this occurs, empty the
spoil tank. Refer to “Dumping Spoil Tank,”
page 50-15 .
Step 9: When vacuuming dry materials, the Tank Full shutdown sensor does not
function. Stop vacuuming when spoil tank level reaches sight glass
(3), or
when debris can be heard circulating in the cyclonic separator.
Step 10: If engine did not shut off automatically, follow the Shutdown Procedure , page
23-1 , and remove ignition key.
Step 11: Disconnect hoses. Securely store all tools and hoses before traveling to the
spoil disposal site.
2
3