Vermeer McLaughlin V25, Руководство оператора и по техническому обслуживанию

Страница: 49 / 182

V25/VX30G/VSK25/VSK30G Vacuum Excavators Shutdown Procedure 23-1
Section 23: Shutdown Procedure
S
TOPPING THE
M
ACHINE
NOTICE: For your safety and the safety of others, use the shutdown procedure before servicing, cleaning,
unclogging, or inspecting the machine.
A variation of this procedure may be used if instructed within this manual, or if an emergency requires it.
Step 1: Reduce engine speed to idle.
Step 2: Verify all switches are in OFF/DOWN position.
Step 3: If equipped, move Reverse Flow Control Valve handle to NEUTRAL.
Step 4: Shut off engine and remove ignition key.
Step 5: Relieve water pressure from water-assisted tool(s) by squeezing trigger. Disconnect tool(s) from hose.
WARNING: Avoid high pressure water. High pressure water from digging tool or wash wand
can penetrate body tissue and result in serious injury or death. Fluid injected under the skin
must be removed immediately by a surgeon familiar with this type of injury.
Never point the digging tool or wand at anyone or at any part of the body. Never use the high
pressure wand to clean any part of your body or clothing.