manualshive.com logo in svg

Vermeer McLaughlin V25, Руководство оператора и по техническому обслуживанию

Поделиться
Скачать
Vermeer McLaughlin V25 Скачать руководство пользователя страница 22

10-4  Safety Messages

V25/VX30G/VSK25/VSK30G Vacuum Excavators

WARNING:  

Fuel and fumes can explode and burn.

Shut off engine before refueling. No flame. No smoking.

WARNING:  

Avoid high pressure water. High pressure water from digging tool or wash wand 

can penetrate body tissue and result in serious injury or death. Fluid injected under the skin 
must be removed immediately by a surgeon familiar with this type of injury.

Never point the digging tool or wand at anyone or at any part of the body. Never use the high 
pressure wand to clean any part of your body or clothing.

WARNING:  

Contact with moving parts can result in death or serious injury.

 

Keep all shields in place when operating.

 

 

Содержание McLaughlin V25























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды