EUROBLOC
GENERAL OVERHAUL INSTRUCTIONS
60/69
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
09/2016
19.3 Push button controller
c_hopbnw1b
1.Movement push buttons
2. Hoist selection push button (only if pushbutton controls several hoists)
3. Push button ON and warning signal
4. Emergency stop push button
5. Display (optional)
Checklist for push button controller:
Inspection method:
Check that the operating buttons are in good condition,
and replace them if any damage is found.
Check that the buttons work smoothly, feel that the
steps or detents work without any sticking or binding.
Ensure that the push button box frame has no cracks or
other damage, and that the control cable and strain wire
are properly and securely fixed.
Visual. Operational testing.
TO ORDER: a push button controller: See Spare Part Catalogue
19.4 Radio receiver
It is recommended to replace the radio receiver in context with a General Overhaul service, especially if the radio
receiver has not been replaced earlier.
Replace the radio receiver if:
Inspection method:
The radio receiver is not working normally, or dates
back to the original hoist rollout.
Operational testing. Check the hoist maintenance
history.
TO ORDER: a radio receiver: See Spare Part Catalogue
