81
AG-7.2.B1-092414 • Restricted - customer use only
Host:
IP address or URL of the program source.
Port
IP Port address to access the program.
HTTP node name
The name of the HTTP node as configured in the
Mediahub, for streaming data of the required PID.
Storage node name
The name of the Storage node as configured in the
Mediahub where data for the required PID is stored.
Program name
The name of the program to encode the TS stream.
Close Gaps from cache:
If the encoder losses the feed it keeps recording a
black screen, until the feed comes back. In this way
downtime is represented in the recorded data.
Detect PAT/PMT events
Depreciated, no longer used.
Handle PAT/PMT events:
Depreciated, no longer used.
Handle XDS events:
The system will process Extended Data Services events
and log them.
Stop on scrambled:
Ignore encrypted streams so MIP does not generate
erroneous alerts.
Enable low bitrate
streams:
Enable/Disable handling of low bitrate streams. This is
normally disabled because it may slow down recovery
in the event of connection loss. When there is almost
no payload (black video for example) this should be
enabled.
Table: Transport Stream Input Profile (IP Ingest Section)
Figure: Encoder Cloud Input
