030-300554 Rev. A
123
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
NAPT Address:
The NAPT address into which the original IP address will be translated. The combo box
displays all of your added NAPT addresses/ranges, from which you can select an entry. If you would like to
add a new address, select the 'User Defined' option in the combo-box. Similarly, this will commence a
sequence that will add a new network object. Note, however, that in this case the network object may only
be an IP address, as NAPT is port-specific.
NAPT Ports:
Specify the port(s) of the IP address into which the original IP address will be translated.
Enter a single port or select
Range
in drop-down list. The screen will refresh, enabling you to
enter a range of ports.
Log Packets Matched by This Rule:
Check this check box to log the first packet from a connection
that was matched by this rule.
Schedule:
By default, the rule will always be active. However, you can configure scheduler rules by
selecting
User Defined
, in order to define time segments during which the rule may be active. Refer to
section 15.19 for details on setting up schedule rules.
After you select the desired NAT/NAPT rules, click
OK
to continue.
