030-300554 Rev. A
121
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
Select the
Network Object Type
from drop-down list, select the desired object type. A single IP address, an entire
subnet, a range of addresses or a specific DHCP Vendor option. (These are generic “Network” objects that are
defined in the
Network Objects
section.)
For example, if you select
IP Address
as the network object type you must specify a single WAN IP address to add
to the pool. Enter a valid WAN IP address then click
OK
to continue.
If you have entered an IP Address and clicked
OK
in the
Add Item
screen, you are directed back to the main screen
and your network address is shown in the pool. You now must create the
NAT/NAPT Rule Set
for this new external
IP Address. To create rule, under
NAT/NAPT Rule Sets
, click the
New Entry
link.
