Puma Disc Inkjet Printer
ZZ 004 833 - 24 -
Example 2
The 2
nd
test image prints out of line as shown in Example 2 (the red broken circles are
printing too far right on the X-axis and too far down on the Y-axis). To bring the two test
prints together you would need to adjust the X-axis by a negative value and the Y-axis by a
negative value.
Under Step 1 on the Calibration screen, select the negative (‘-‘) check box next to the X-
axis and the Y-axis and enter a value in each between 1 and 5.
6. Once you have entered a value, repeat Steps 2, 3 and 4 until both Test prints align.
Some trial an error will be required in order to get the alignment exactly right.
7. When you have completed the calibration, hit the
Exit
button, the numbers you have
entered are stored inside the printer’s memory so the calibration you have set will remain if
the printer is powered down or disconnected from the PC.
Example 2
