Puma Disc Inkjet Printer
ZZ 004 833 - 22 -
Note:
In order to set the calibration, the Puma must be attached to your PC via the USB cable.
Calibration will not work if the printer is connected via the parallel port.
Click the
Set Print Position
button, the Calibration Screen appears (See Fig. 24).
Follow the on screen instructions.
1. Step 1: Set both offsets to ‘0’. This is the default setting.
2. Step 2: Place a disc onto the CD tray and retract the tray into the printer. Click ‘1
st
Test
Print’. A series of solid black circles will print onto the disc as shown in Fig. 24 on the
previous page.
Fig. 23
Fig. 24
