The PCIe riser assemblies that are outlined in red are numbered 1 and 2 from right
to left. Slots 1 through 6 are shown in the risers.
The following list describes the numbered items.
1.
VGA port
2.
Three USB ports
3.
IPMI remote management port
4.
Four copper, RJ45, 1Gb Ethernet* ports, NIC1/eth0, NIC2/eth1, NIC3/eth2,
and NIC4/eth3, left to right.
5.
Riser Assembly 1, Slot 4, contains a SAS3 HBA card that connects to the SAS3
ports on the Primary Storage Shelf.
6.
Riser Assembly 2, Slot 1, contains a SAS3 HBA card that connects to the SAS3
ports on the Primary Storage Shelf.
7.
One two-port 10GbE network interface card (NIC). From left to right the ports
are NIC5/eth4 and NIC6/eth5.
The following diagram shows the location of the Ethernet ports, from 0 to 5.
Note:
* The embedded Ethernet ports are copper. PCIe Ethernet ports are fibre.
You cannot bond the copper ports and the fibre ports to each other.
10
Overview
Access 3340 compute node rear panel
