manualshive.com logo in svg

Verint Nextiva S4200-2V-BZ, Руководство пользователя

Поделиться
Скачать
Verint Nextiva S4200-2V-BZ Скачать руководство пользователя страница 54

3: Configuring and Installing the Device

48

Verint Video Intelligence Solutions

8. Remove the dust caps from the main (Video/Serial/Power) and optionally the auxiliary 

connectors.

9. Connect the video/serial/power cable to the main connector of the S4200 device. To 

properly install the cable connector on the device, use your hands and turn until it 
blocks. Do not use pliers.

10. Plug the BNC video connector of the video/serial/power cable on the analog camera 

associated to the first input (video 1). 

11. Perform the serial connection to the analog camera (see page 50).

12. If your device is a -2V model:

a. Connect the second video/serial/power cable to the Auxiliary connector of the 

S4200 device.

b. Plug the BNC video connector of the second video/serial/power cable on the analog 

camera associated to video 2. 

c. Perform the serial connection to the analog camera (see page 50).

13. If you purchased the alarm/audio option, plug the supplied alarm/audio cable into the 

Auxiliary connector of the device.

14. If required, install an external antenna (see page 49).  

For more information about surge protection, see Appendix C on page 110. 

Note: Video analytics is only available on the first input of the device. Therefore, on 

the S4200-AS-2V, you must connect the camera for which analytics is required 
on the main connector of the device.

Tip: If you are installing the S4200 equipment in a lightning prone environment or in a 

site where large AC mains power fluctuations are a common occurrence, add external 
surge protection to secure your equipment. 

Tip: For easy maintenance, it is strongly recommended to plug an outdoor Ethernet cable 

on the device and to run it down the pole. Tie the cable to the pole 2 feet (0.7 meter) 
or less below the device, while ensuring that there is no tension between the device 
and the tie point. Insert the other end of the cable in a waterproof electrical box for 
outdoor applications. Add external surge protection near the device to protect the 
Ethernet port.

Tip: If the S4200 is directly exposed to the sun in an environment likely to reach 122°F 

(50°C), install a sun shield. Otherwise, reduce the maximum operating temperature 
by 18°F (10°C) to protect the equipment; that is, without a sun shield, the maximum 
temperature should be 104°F (40°C).

Содержание Nextiva S4200-2V-BZ

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды