Verint Nextiva S4200-2V-BZ, Руководство пользователя

Страница: 41 / 152

Verint Video Intelligence Solutions 35
Nextiva S4200 Series User Guide
Configuring the Wireless System
The configuration steps to execute are:
„
Set a series of parameters
„
If required, establish a point-to-point connection between the transmitter and a
receiver
Device configuration requires the use of the proprietary SConfigurator tool. Its latest
version is included on the Verint web site (
www.verint.com/manuals ). You need to copy its
executable file (
SConfigurator.exe
) to the hard disk of your computer.
The minimum hardware and software requirements for the host computer needed to
configure the edge device are:
„
An Ethernet network card
„
Internet Explorer 6.0 or higher
„
Microsoft DirectX 8.1 or higher
„
Windows 2000 Service Pack 2 or higher, or Windows XP Service Pack 2 or higher
Supplied Cables
Your S4200 shipment comes with the following cables:
„
One or two video/serial/power cables (two cables for a -2V model)
Note: Prior to deployment in the field, this wireless device requires configuration and
testing.
Mating connector
Power wires
BNC video connector
RS-422/485 wires